Genevieve Swiss Industries provides tools for Swiss Type CNC MachinesTooling and Accessories for Swiss Type CNC Machines
tooling for swiss machines
tooling for swiss machines
tooling for swiss machines
tooling for swiss machines
tooling for swiss machines
rotary broaching products for swiss machines
tools for CITIZEN swiss machines / lathes
swiss thread whirling products
Swiss turning tools from UTILIS
rotary broaching products for swiss machines
floating reamer holders for swiss machines
swiss silver cutting oil
solid carbide slitting saws and arbors
solid carbide insert spot drills for swiss machines
knurling tools for cnc and swiss machines
axial floating tapping collets for taps in CNC machines
axial floating tapping precision collet sleeves, drill sleeves and chucks for swiss machines
Magnetic finishing and deburring units for small parts
 		 Knurling Tools for CNC Swiss Type CNC Machines

Genevieve Swiss can provide knurling holders and dies for most applications. Our knurl holders are compact and fit into the tight tooling envelope of your Swiss-Type CNC machines. Compact Straddle Knurl holders that can be set to the correct diameter outside of the machine make setup easier to knurl small diameter parts.

Our Knurl Form Dies are manufactured to extremely high standards from premium alloys. Available in Convex Style for Axial Feeding, Beveled for Axial feed to a shoulder or flange on the part, and Standard Bump Style for simple knurling jobs. Available in Vaccuum Hardended HSS or Hi-Cobalt Steel with a variety of hard coatings such as TiN

  • Extremely accurate Knurl Dies provide best knurling results
  • Compact Straddle Knurl Holders are ideal for CNC Swiss Machines
  • Convex Knurls make Axial Feeding jobs run smoothly and provide excellent service life

 

 straddle knurling holder for swiss type machines
Knurling Holders for Swiss Type CNC Machines
Compact Straddle Knurl Holders for Swiss-Type Machines
Part No.
Knurl Die Series
O.D. Capacity
KHS-2BPR-(Shank Size)
BP Series: 5/16 x 5/32 x 1/8
0"- .250"
KHS-2EPR-(Shank Size)
EP Series: 1/2 x 3/16 x 3/16
0" - .750"
Shank Sizes Available: (1/2" or 5/8") x .812 wide
Single Die Bump Knurl Holders
Part No.
Hand
Knurl Die Series
Shank Size
KHB-1BP
R / L
BP Series: 5/16 x 5/32 x 1/8
.312" or .375"
KHB-1EP
R / L
EP Series: 1/2 x 3/16 x 3/16
.500"
KHB-1GK
R / L
GK Series: 5/8 x 1/4 x 1/4
.625"
KHB-1KP
R / L
KP Series: 3/4 x 3/8 x 1/4
.750" or 1"
Cost Effective Standard Bump Knurls for basic applications
Compact Double Die Bump Holder
Part No.
Hand
Knurl Die Series
Shank Size
KHB-2EPR-625
R
EP Series: 1/2 x 3/16 x 3/16
.625"
KHB-2EPR-500
R
EP Series: 1/2 x 3/16 x 3/16
.500"
Heavy Duty Compact 3 Die Adjustable External Knurling Holder
Part No.
Knurl Die Series
O.D. Capacity
KHE-3DBP-625-10
BP Series: 5/16 x 5/32 x 1/8
.060" - .475"
CONVEX KNURLS recommended for this holder
KHE-3DBP-750-12
KHE-3DEP-625-10
EP Series: 1/2 x 3/16 x 3/16
.090" - .475"
KHE-3DEP-750-12
Larger Holder Sizes Avaiable, Call for Details.
Precision Knurling Dies & Tools for Swiss Type CNC Machines
CONVEX Profile Knurl Dies - Ideal for Axial Feeding
Roll Series Wheel Size
OD x Width x ID 		Straight 30° Left Hand 30° Right Hand Available Die Pitch*
 
Specify:
Teeth Per Inch
-or-
Diametral Pitch
EP-Series
1/2 x 3/16 x 3/16
EPSV
EPLV
EPRV
TPI: 16,20,21,25,30,32,35,40,50,80
Diametral Pitch: 64,96,128,160
GK-Series
5/8 x 1/4 x 1/4
GKSV
GKLV
GKRV
TPI: 16,20,25,30,32,35,50,50,80
Diametral Pitch: 64,96,128,160
KN-Series
3/4 X 1/4 X 1/4
KNSV
KNLV
KNRV
TPI: 16,20,25,30,35,40,50
Diametral Pitch: 64,96,128,160
KP-Series
3/4 x 3/8 x 1/4
KPSV
KPLV
KPRV
TPI: 8,10,12,14,16,20,21,25,30,32,33,35,40,50,80
Diametral Pitch: 64 96,128,160
PH-Series
1-1/4 x 1/2 x 1/2
PHSV
PHLV
PHRV
TPI: 8,10,12,14,16,20,25,30,40,50
Diametral Pitch: 64,96,128,160
*Note: Listed Pitch Values are for Straight Tooth knurls, LH & RH Spirals have fewer available pitch values
Standard Bump Knurl Dies
Roll Series Wheel Size
OD x Width x ID 		Straight 30° Left Hand 30° Right Hand 30° Male 30° Female Available Die Pitch*
   

Specify:
Teeth Per Inch
-or-
Diametral Pitch

BP-Series
5/16 x 5/32 x 1/8
BPS
BPL
BPR
BPM
BPF
 TPI: 20,25,30,35,40,50,60,70,80,90,100
DiametralPitch: 96,128,160
EP-Series
1/2 x 3/16 x 3/16
EPS
EPL
EPR
EPM
EPF
 TPI: 16,20,25,30,32,35,40,41,50,53,60,70,80
DiametralPitch: 64,96,128,160
GK-Series
5/8 x 1/4 x 1/4
GKS
GKL
GKR
GKM
GKF
 TPI: 12,16,19,20,25,29,30,32,35,40,41,50,80
Diametral Pitch: 64,96,128,160
KN-Series
3/4 X 1/4 X 1/4
KNS
KNL
KNR
KNM
KNF
 TPI: 10,12,14,16,20,24,25,29,30,35,40,41,50,80
DiametralPitch: 64,96,128,160
KP-Series
3/4 x 3/8 x 1/4
KPS
KPL
KPR
KPM
KPF
 TPI:8,10,12,14,16,20,21,25,30,33,35,40,50,60,80
DiametralPitch: 64,96,128,160
KR-Series
3/4 x 1/2 x 1/4
KRS
KRL
KRR
KRM
KRF
 TPI: 16,20,25,30,50
DiametralPitch: 48,72,128,160
PH-Series
1-1/4 x 1/2 x 1/2
PHS
PHL
PHR
PHM
PHF
 TPI: 12,14,16,20,25,30,40,50
DiametralPitch: 64,96,128,160
*Note: Listed Pitch Values are for Straight Tooth knurls, LH & RH Spirals have fewer available pitch values
 
 

We Proudly Represent
Thank you for taking the time to visit our website. If you have any questions regarding our products or about a Swiss-Type Machining application. Please do not hesitate to contact us

Genevieve Swiss Industries, Inc.
6 Old Stage Road
Westfield, MA 01085

Ph: (413) 562-4800 | Fax (413) 562-4802 | Email: sales@genswiss.com
All Images & Textual Content are ©Copyright 2008 Genevieve Swiss Industries, Inc. and may not be used without permission