Straddle Knurling Holders for Swiss Machines
 

Conventional 'bump' knurling methods are undesirable for smaller diameter parts as the forces will deflect the workpiece. To control this problem, a straddle knurl holder should be used to provide support to the workpiece while the knurling operation is performed. Low profile straddle knurling holders are adjustable to accomodate a range of part diameters.

Specifically designed for Swiss-type machines, our low profile straddle knurl holders keep interference to a minimum within the tooling layout of most machines while enabling use of adjacent tool positions to maximize tooling capacity.

These holders are ideal for machines such as Citizen, Star, Tsugami, Tornos, Hanwha as well as Ganesh turning centers.

straddle knurling tooling for swiss machines Compact Straddle Knurl Holders for Swiss-Type Machines
Part No.
Shank size
Knurl Die Series
O.D. Capacity
KHS-2BPR-375.1
.375"
BP Series: 5/16 x 1/8 x 5/32
0" - .394"
KHS-2EPR-500.3
.500"
EP Series: 1/2 x 3/16 x 3/16
0" - .750"
KHS-2EPR-625.3
.625"
EP Series: 1/2 x 3/16 x 3/16
0" - .750"
Shank Sizes Available: (3/8", 1/2" or 5/8")

Click Here for Available Knurling Dies

 
Contact us for Swiss Type Tooling

We Proudly Represent


Thank you for taking the time to visit our website. If you have any questions regarding our products or about a Swiss-Type machining application, please do not hesitate to contact us.
Genevieve Swiss Industries, Inc.
6 Old Stage Road
Westfield, MA 01085
Ph: (413) 562-4800 | Fax (413) 562-4802 | Email: sales@genswiss.com

All Images & Content are ©Copyright Genevieve Swiss Industries, Inc. and may not be used without permission