Tooling and Accessories For Citizen A20 & A32 Machines

Live Spindles for Citizen A20 Type VII CNC Swiss Machines

CIT-BSC-510-3X

CIT-BSC-510-3X - High Speed x-axis spindle designed for Citizen A20 VII Machines. Directly installs to the modular tool station with no retro fit. 1:3 gear ratio for 3X output. Uses REGO-FIX ER11 Collets.

CIT-BSE-2007-DE

CIT-BSE-2007-DE - Double ended double Z-axis ER11 spindle for Citizen A20 Machines. Capable of adding up to 4 live tool positions. 1:1 gear ratio. Adds 4 live tool positions

CIT-BSE-207

CIT-BSE-207 - Two Position Z-axis ER11 spindle for Citizen A20 machines. 1:1 gear ratio. features 2 stations facing the main guidebushing/spindle.

CIT-BSE-107-DE

CIT-BSE-107-DE - Double ended z-axis ER11 spindle for Citizen A20 Machines. 1:1 gear ratio. Adds live tooling z-axis capability on the subspindle.

CIT-BSA-107

CIT-BSA-107 - Angle drilling and milling head for Citizen A20 machines. 1:1 gear ratio. Adds angle feature generating capabilities. Adjustable 0-180 degrees. Note: Interferes with adjacent live tool station.


Live Spindles for Citizen A32 Type VII Machines

CIT-BSC-610-3X

CIT-BSC-610-3X - High Speed x-axis spindle designed for Citizen A32 VII Machines. Directly installs to the modular tool station with no retro fit. 1:3 gear ratio for 3X output.

CIT-BSE-3207-DE

CIT-BSE-3207-DE - Double ended double Z-axis ER16 spindle for Citizen A32 VII Machines. Capable of adding up to 4 live tool positions. Enables simultaneous front and back machining with independent spindle rotation. 1:1 drive ratio.
PLEASE NOTE: This Attachment is for DRILLING ONLY

CIT-BSE-3208-III

CIT-BSE-3208-III - Double ended QUAD Z-axis ER16 spindle for Citizen A32 VII Machines. Capable of adding up to 8 live tool positions. 1:1 drive ratio.

REDESIGNED WITH INTERNAL GEARING


Recommended Accessories for Citizen A20 & A32 Machines

MULTIDEC-LUBE **COOLANT-THRU** TOOL CLAMPING WEDGE

MULTIDEC-LUBE **COOLANT-THRU** TOOL CLAMPING WEDGE : The BEST solution for running coolant thru high pressure tooling on your A20 Citizen Machine. The Multidec-LUBE tool clamping wedge replaces the standard tool holding wedge on your gang slide and converts ANY square shank Swiss turning tool into a coolant-thru tool. Rigid single piece tool clamping wedge retains the same holding ability as a standard wedge, even during heavy cuts. INSTALL the Multidec-LUBE system on your Citizen A20 Today!


2160 Series Rotary Broaching Tool Holder for CNC Swiss

2160 Series Rotary Broaching Tool Holder for CNC Swiss: A low profile Rotary Broach Holder specifically designed for CNC Swiss Type Machines. Reduces setup time by eliminating the need indicate the broach to center and is small enough to fit into the tightest tooling setups. Capable of withstanding up to 2250lbs of thrust force, this rotary broach holder is ideal for swiss-type medical applications and works well for broaching tough materials such as Titanium, 300 Series Stainless and other medical grade alloys. Click here for more info


Precision ER Collet holders and tool holding products for CITIZEN Swiss Machines

Precision ER Collet holders and tool holding products for CITIZEN Swiss Machines: GenSwiss is proud to offer a complete line of ER Straight shank collet holders for STAR CNC Swiss machines. Quick change type, coolant thru and Super Precision for micro tool holding are also available Click here for more info

 


Straddle Knurling Holders

Straddle Knurling Holders: Conventional 'bump' knurling methods are undesirable for smaller diameter parts as the forces will deflect the workpiece. To control this problem, a straddle knurl holder should be used to provide support to the workpiece while the knurling operation is performed. Low profile straddle knurling holders are adjustable to accomodate a range of part diameters. Click here for more info


Ti-Loc Saw Arbors and Endmill Extensions

Ti-Loc Saw Arbors and Endmill Extensions: An exciting product in the GenSwiss Signature tooling line,The Ti-Loc SwissClamp System. This Taper-integrated small tooling system is designed to work with virtually any collet or tool holder that employs the dual angle ER collet system (DIN6499)
Click here for more info