Live Tooling for Citizen M5-32
M5-32 LIVE TOOLING ATTACHMENTS
Cross Drilling/Milling
M5-32 Machines
Operation | Product No. | (#Tools)Size | Output | Coolant-Thru | Other |
---|---|---|---|---|---|
Cross Drilling / Milling | KSC-113 | (1) ER20 | 1:1 | Exterior | |
Cross Drilling / Milling | KSC-213 | (1) ER20 | 1:1 | Exterior | Shorter than KSC-113 |
Cross Drilling / Milling | KSC-313 | (2) ER20 | 1:1 | Exterior | |
Cross Drilling / Milling | KSC-107-4X | (1) ER11 | 1:3.8 | Exterior | High Speed |

KSC-107-4X
Cross drilling & milling spindle
Collet Size: ER11
Output: 1:3.8
High Speed

KSC-113
Cross drilling & milling spindle
Collet Size: ER20
Output: 1:1
Exterior Cooling

KSC-213
Cross drilling & milling spindle
Collet Size: ER20
Output: 1:1
Exterior Cooling
Shorter than KSC-113

KSC-313
Cross drilling & milling spindle
Collet Size: (2) ER20
Output: 1:1
Exterior Cooling
End Drilling/Milling
M532 Machines
Operation | Product No. | (#Tools)Size | Output | Coolant-Thru | Other |
---|---|---|---|---|---|
End Drilling / Milling | KSE-113 | (1) ER20 | 1:1 | Exterior | Tool Dia: 13mm Max Tool Length: 66.5mm Max |
End Drilling / Milling | KSE-213 | (1) ER20 | 1:1 | Exterior | Tool Dia: 13mm Max Tool Length: 82.5mm Max |

KSE-113
End drilling & milling spindle
Collet Size: ER20
Output: 1:1
Max Tool Dia: 13mm
Max Tool Length: 66.5mm

KSE-213
End drilling & milling spindle
Collet Size: ER20
Output: 1:1
Max Tool Dia: 13mm
Max Tool Length: 82.5mm
Polygon Milling
M532 Machines
Operation | Product No. | (#Tools)Size | Output | Coolant-Thru | Other |
---|---|---|---|---|---|
Polygon Milling | KSP-580 | (1) Ø15.875mm | 17:54 | None | Tool Dia: 80mm Max Too Width: 16mm Max |
Polygon Milling | KSP-680 | (1) Ø15.875mm | 1:1 | None | Tool Dia: 80mm Max Too Width: 16mm Max |

KSP-580
Polygon Milling
Arbor Size: 15.875mm
Output: 17:54
Max Tool Dia: 80mm
Tool Width: 16mm

KSP-680
Polygon Milling
Arbor Size: 15.875mm
Output: 1:1
Max Tool Dia: 80mm
Tool Width: 16mm
Tool Holder
M532 Machines
Operation | Product No. | (#Tools)Size | Output | Coolant-Thru | Other |
---|---|---|---|---|---|
Tool Holder | CDF-1101-HP | (3) Ø25.4mm | Interior & Exterior | 3 Position 1” Ø Sleeves | |
Tool Holder | CDF-1301 | (1) Ø25.4mm | Exterior | ||
Tool Holder | CDF-1401 | (1) Ø25.4mm | Interior |

CDF-1101-HP
Tool Holder
Tool Ø Size: (3)25.4mm
Interior & Exterior Cooling
Holds 3 1inch Ø sleeves

CDF-1301
Tool Holder
Tool Ø Size: (1) 25.4mm
Exterior Cooling
Holds a single 1inch Ø sleeve

CDF-1401
Tool Holder
Tool Ø Size: (1) 25.4mm
Interior Cooling
Holds a single 1inch Ø sleeve