Tooling and Accessories For Citizen K16 Machines
LIVE TOOLING ATTACHMENTS
CIT-GSE2507-DE - Double Z-axis Spindle for Drilling and Milling on the main spindle.
Also features Double Z-axis spindle positions for machining on the subspindle.
Uses ER11 Collets for max tool diameter of 7mm
Gear Ratio 1:1
CIT-GSW-101-U9 - The Citizen K16 Thread Whirling Spindle turns your Citizen Swiss Machining Center into a speedy medical implant or aerospace fastener producing powerhouse.
Features 1:1 gearing for faster whirling RPMs vs. typical 2:1 ratio whirling units
15 Degree Helix angle adjustment
Uses UTILIS (9) Insert Indexable insert Cutter Ring
CIT-GSE2207- Z-Axis spindle for milling and drilling on the Citizen K16 subspindle.
(1) ER11 Position - Subspindle side
Standard Gear Speed Ratio of 1:1
Direct OEM replacement
CIT-GSC860- Double cross drilling & milling spindle for the Citizen K16 machine.
Adds an additional live station for work on the subspindle.
Uses ER11 Collets
Standard Gear Ratio of 1:1
Direct OEM replacement
**NOTE** NOT RECOMMENDED FOR USE WITH SLITTING SAW BLADES.
CIT-BDF104- Single position ID working block. Installs in a live tool position.
20mm shank bore accepts 20mm collet sleeves
57.5mm height
Direct bolt on fitment.
CIT-BDF106- Double position ID working block. Installs in a live tool position.
(2) 20mm shank bores accepts 20mm diameter shank collet sleeves
57.5mm height and 87.5mm height
Direct bolt on fitment.
CIT-BDF107- Double position ID working block. Installs in a live tool position.
(2) 3/4" shank bores accepts 3/4" diameter shank collet sleeves
57.5mm height and 87.5mm height
Recommended Accessories for Citizen K16 Machines
MULTIDEC-LUBE **COOLANT-THRU** TOOL CLAMPING WEDGE : The BEST solution for running coolant thru high pressure tooling on your K16 Citizen Machine. The Multidec-LUBE tool clamping wedge replaces the standard tool holding wedge on your gang slide and converts ANY square shank Swiss turning tool into a coolant-thru tool. Rigid single piece tool clamping wedge retains the same holding ability as a standard wedge, even during heavy cuts. INSTALL the Multidec-LUBE system on your Citizen K16 Today!
2160 Series Rotary Broaching Tool Holder for CNC Swiss: A low profile Rotary Broach Holder specifically designed for CNC Swiss Type Machines. Reduces setup time by eliminating the need indicate the broach to center and is small enough to fit into the tightest tooling setups. Capable of withstanding up to 2250lbs of thrust force, this rotary broach holder is ideal for swiss-type medical applications and works well for broaching tough materials such as Titanium, 300 Series Stainless and other medical grade alloys. Click here for more info
Precision ER Collet holders and tool holding products for Citizen Swiss Machines: GenSwiss is proud to offer a complete line of ER Straight shank collet holders for STAR CNC Swiss machines. Quick change type, coolant thru and Super Precision for micro tool holding are also available Click here for more info
Straddle Knurling Holders: Conventional 'bump' knurling methods are undesirable for smaller diameter parts as the forces will deflect the workpiece. To control this problem, a straddle knurl holder should be used to provide support to the workpiece while the knurling operation is performed. Low profile straddle knurling holders are adjustable to accomodate a range of part diameters. Click here for more info
Ti-Loc Saw Arbors and Endmill Extensions: An exciting product in the GenSwiss Signature tooling line,The Ti-Loc SwissClamp System. This Taper-integrated small tooling system is designed to work with virtually any collet or tool holder that employs the dual angle ER collet system (DIN6499)
Click here for more info