Tooling and Accessories For Citizen L20 Machines

CIT-GSC-510-3X - This High Speed Cross Drill/Mill Spindle is a direct replacement of the OEM spindles and provides a 3x speed output up to 15,000 Max RPMs. Uses a standard ER 11 Collet.
- Simple to install, requires no retrofitting or modifications to the gang block.
- Minimizes Burrs and Improves surface finishes by machining at high speeds
- Directly gear driven from the Citizen motor provides maximum torque & speed. Distance from Guide Bushing to Tool centerline is 15mm

CIT-GSC-510-4X - This High Speed Cross Drill/Mill Spindle is a direct replacement of the OEM spindles and provides a 4X speed ouput. Uses a standard ER8 Collet.
- Easy to install. Lower profile than our 510-3X
- Minimizes Burrs and Improves surface finishes by machining at high speeds
- Output 4X programmed speed
Fits L5-20, L20VI, L20VII, L20VIII

CIT-GSC1110-4X - This High Speed Drill/Mill Spindle is a direct replacement of OEM spindles and provides a 4X programmed speed output. Uses a standard ER 8 Collet for MICRO TOOLS.
- Planetary gearset maintains low profile
- Unique sealing system protects spindle bearings from cutting oil and contaminants while reducing heat due to seal friction.
FITS: L2-20, L32, M4-20, M4-32, A20 / A32

CIT-GSE-306-DE312-3X - This High Speed Z-Axis Spindle directly replaces OEM milling spindles and provides a 3X speed output up to 13,500 RPMs. Uses Standard ER11 collets. Capable of drilling on front and back spindle
Max Drilling depth is 26mm
Single Ended High-speed & Standard speed gearing available as well. Call for details.

CIT-GSC-204-3X - This High Speed Cross Drill/Mill Spindle directly replaces OEM milling spindles and provides a 3X speed output up to 15,000 RPMs. Uses Standard ER11 collets.

Replaces OEM Spindles in Position T6 & T7 in the Citizen L20 type VII & L20 type VI

CIT-GSE3507-3X - This High Speed End working Drill/Mill Spindle directly replaces OEM milling spindles and provides a 3X speed output up to 15,000 RPMs. Uses Standard ER11 collets. Features an internal nut design for low interference.

Replaces OEM Spindles in the backworking positions in the new Citizen L20 type IX and X

CIT-SAU919-S - Static tool holder for use in backworking positions of L20X and XII. Features a narrow .500" flange enabling deeper hole drilling operations to be performed. Designed to hold .750" diameter shank collet sleeves or boring bars. Cost effective way to get additional flexibility out of your equipment.

A MUST HAVE Accessory for Citizen L20X and L20XII

CIT-GSS510 - This Slitting Saw Spindle fits a standard milling spindle position. It is an effective way to produce deep slots in the ends of a workpiece.

Features a 13mm diameter arbor and can hold a max diameter saw of 50mm.
Speed ratio is 1:1.
This spindle takes up two gang slide positions.

CIT-LSW215-U12.1 - This Whirling Spindle is ideal for screws smaller than 12mm in diameter and have less than +/- 15 degree helix rotation. Unit includes the UTILIS (12) insert HIGH PERFORMANCE whirling ring.

This unit features increased gearing ratio of 1:1 for increased productivity & faster cycles.
Other cutting ring options are available

MWT12 164 4060 130 12: Quick Change Whirling Assembly, 12 Pocket for LSW215.

NEW modular design thread whirling ring for PCM LSW215 whirling spindle. Easily change out inserts without distirubing the helix angle setting of the whirling attachment. In addition this new ring features a coolant deflection flange to assist with protecting the whirling spindle's bearings from high pressure coolant contamination.

Installation is easy - By utilizing the Standard 3+3 position setup, the new 5-position blocks can be installed without the need to modify the machine and can be completed in less than an hour.Multiple blocks can be used for quick change setting of 10 ID tools in less than 10 minutes. Eliminates breaking down complex jobs and saves time.

Desgined for the L5-20 (5M7)

Precision ER Collet holders and tool holding products for Citizen Swiss Machines: GenSwiss is proud to offer a complete line of ER Straight shank collet holders for STAR CNC Swiss machines. Quick change type, coolant thru and Super Precision for micro tool holding are also available Click here for more info

Straddle Knurling Holders: Conventional 'bump' knurling methods are undesirable for smaller diameter parts as the forces will deflect the workpiece. To control this problem, a straddle knurl holder should be used to provide support to the workpiece while the knurling operation is performed. Low profile straddle knurling holders are adjustable to accomodate a range of part diameters. Click here for more info