Live Spindles for Citizen A32 Type VII CNC Swiss Machines
Cross Drilling/Milling
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Cross Drilling / Milling | GSC-1110 | (1) ER16 | 1:1 | A32, L32 | |
Gang Slide | Cross Drilling / Milling | GSC-1110-4X | (1) ER08 | 1:3.8 | A32, L32 | High Speed, Up to 30,000 RPM |
Gang Slide | Cross Drilling / Milling | GSC-1110-F | (1) M10 | 1:1 | A32, L32 | For SECO Combimaster mill tool with M10 attachement |
Gang Slide | Cross Drilling / Milling | GSC-1113 | (1) ER20 | 1:1 | A32, L32 | |
Gang Slide | Cross Drilling / Milling | GSC-1310-HP | (1) ER16 | 1:1 | A32, L32 | High Pressure Coolant Thru, Max Pressure 137 Bar, G1/8 Fitting |
Gang Slide | Cross Drilling / Milling | BSC-210 | (1) ER16 | 1:1 | A32, L32 | |
Gang Slide | Cross Drilling / Milling | BSC-610-L-3X | (1) ER11 | 1:1 | A32, L32 | High Speed, Added bearing for strength |
Gang Slide | Cross Drilling / Milling | BSC-1330 | (1) ER16 | 1:1 | A32, L32 | Requires 2 Tool Positions |
Gang Slide | Cross Drilling / Milling | BSC-2330 | (1) ER11, (1) ER16 | 1:1 | A32, L32 | Requires 2 Tool Positions |
Sub Spindle | Cross Drilling / Milling | GSC-1110 | (1) ER16 | 1:1 | A32, L32 | |
Sub Spindle | Cross Drilling / Milling | GSC-1110-4X | (1) ER08 | 1:3.8 | A32, L32 | High Speed, Up to 30,000 RPM |
Sub Spindle | Cross Drilling / Milling | GSC-1110-F | (1) M10 | 1:1 | A32, L32 | For SECO Combimaster mill tool with M10 attachement |
Sub Spindle | Cross Drilling / Milling | GSC-1113 | (1) ER20 | 1:1 | A32, L32 | |
Sub Spindle | Cross Drilling / Milling | GSC-1310-HP | (1) ER16 | 1:1 | A32, L32 | High Pressure Coolant Thru, Max Pressure 137 Bar, G1/8 Fitting |
Sub Spindle | Cross Drilling / Milling | BSC-210 | (1) ER16 | 1:1 | A32, L32 | |
Sub Spindle | Cross Drilling / Milling | BSC-1330 | (1) ER16 | 1:1 | A32, L32 | Requires 2 Tool Positions |
Sub Spindle | Cross Drilling / Milling | BSC-2330 | (1) ER11, (1) ER16 | 1:1 | A32, L32 | Requires 2 Tool Positions |

CIT-GSC-1110 - Standard Milling and Drilling Spindle for A32 Machines, ER16 collet taper, 1:1 gear ratio. Swiss made precision

CIT-GSC-1110-4X - High Speed Drill/Mill Spindle is a direct replacement for standard spindles and provides a 4X programmed speed output. Planetary gearing maintains low profile & unique sealing system prevents contamination of precision bearings. Uses a standard REGO FIX ER 8 Collet

CIT-GSC-1110-F - Cross drilling & Milling spindle, Output 1:1. Uses M10 Collets for SECO Combimaster mill tool

CIT-GSC-1113 - Cross drilling & Milling spindle, Output 1:1. Uses ER20 Collets

CIT-GSC-1310-HP - Cross Drilling and Milling head for A32 Machines. Output 1:1. Uses ER16 Collets. High Pressure Coolant Thru: Max Pressure 137 bar (1987 PSI)

CIT-BSC-210 - Standard Cross drilling & milling spindle for A32 Citizen machines. 1:1 gear ratio. Uses ER16 collet

CIT-BSC-610-L-3X - High Speed x-axis spindle designed for Citizen A32 Machines. Directly installs to the modular tool station with no retro fit. 1:3 gear ratio for 3X output. Uses REGO-FIX ER11 Collets.

CIT-BSC-1330 - Cross Drilling & Milling spindle for Citizen A32 Machines. 1:1 gear ratio. Uses REGO FIX ER16 Collet. Requires 2 Tooling Positions. Fits T30-T35 live tool positions.

CIT-BSC-2330 - Double ended double cross drilling ER11 & ER16 spindle for Citizen A32 Machines. Capable of adding up to 2 live tool positions. 1:1 gear ratio. Fits T30-T35 positions
Angled Drilling/Milling
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Angled Drilling / Milling | BSA-2010 | (6) ER16 | 1:1 | A32, L32 | Adjustable 0-21º, Interferes with adjacent tooling station when at angle |
Gang Slide | Angled Drilling / Milling | BSA-3107 | (1) ER11 | 1:1 | A32 | Adjustable 0-180º , interferes with adjacent tooling station when used at angle |

CIT-BSA-2010 - Adjustable angle drilling and milling attachment. Features 0-21 degree adjustment. Adds up to 6 ER16 tool positions. Installs into T09 station. 1:1 gearing ratio.
Note: Cannot be used in conjunction with U153B optional backworking live tool post due to interference

CIT-BSA-3107 - Adjustable angle drilling and milling attachment. Features 0-180 degree adjustment. 1:1 Gear Ratio. ER11 Collet Size. Crashes with U150B/U151B when working with tool position T11 and T12.
End Drilling/Milling
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | End Drilling / Milling | BSE-3207-III | (4) ER16 | 1:1 | A32, L32 | Double Ended, Spindles rotate in alternating directions |
Gang Slide | End Drilling / Milling | BSE-3208-II | (8) ER16 | 1:1 | A32 | Double Ended, Spindles rotate in the same direction |
Gang Slide | End Drilling / Milling | BSE-3208-III | (8) ER16 | 1:1 | A32 | Double Ended, Spindles rotate in alternating directions |
Gang Slide | End Drilling / Milling | BSE-3106 | (3) ER11 | 1:1 | A32, L32 | |
Gang Slide | End Drilling / Milling | BSE-3205 | (6) ER11 | 1:1 | A32, L32 | Double Ended |
Gang Slide | End Drilling / Milling | BSE-3209 | (3) ER16 | 1:1 | A32, L32 | Spindles rotate in alternating directions |
Gang Slide | End Drilling / Milling | BSE-3210 | (6) ER16 | 1:1 | A32, L32 | Double Ended, Spindles rotate in alternating directions |
Gang Slide | End Drilling / Milling | GSE-1710 | (6) ER16 | 1:1 | A32 | |
Gang Slide | End Drilling / Milling | GSE-1710-2X | (6) ER16 | 1:2 | A32 | High Speed |
Gang Slide | End Drilling / Milling | 5540-000357 | (1) ER11 | 1:4 | A32 | High Speed |

CIT-BSE-3207-III - End drilling / milling attachment. (4) ER16 spindles for front and backworking. 1:1 gear ratio. Inverse spindle rotation (CW/CCW) every other tool position.

CIT-BSE-3208-II - End drilling and milling attachment, (8) ER16 spindles for front and backworking. 1:1 gear ratio. All spindles rotate same direction (CW rotation) for cycle time reduction.

CIT-BSE-3208-III - End drilling and milling attachment, (8) ER16 spindles for front and backworking. 1:1 gear ratio. Inverse spindle rotation (CW/CCW) every other tool position.

CIT-BSE-3106- End drilling and milling attachment, (3) ER11 spindles for work on the guidebushing side. 1:1 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions. Installs into position T10

CIT-BSE-3205 - End drilling and milling attachment, (6) ER11 spindles for work on the guidebushing and subspindle side. 1:1 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions.

CIT-BSE-3209 - End drilling and milling attachment, (3) ER16 spindles for work on the guidebushing side. 1:1 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions.

CIT-BSE-3210 - End drilling and milling attachment, (6) ER16 spindles , 3 front facing / 3 rear facing. 1:1 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions. Installs into position T10

CIT-GSE-1710 - End drilling and milling attachment, (6) ER16 spindles , 3 front facing / 3 rear facing. 1:1 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions.

CIT-GSE-1710-2X - High Speed 2X End drilling and milling attachment, (6) ER16 spindles , 3 front facing / 3 rear facing. 1:2 gear ratio. Spindle rotation CW/CCW. Requires live tool drive reversal between tool positions.
5540-000357
End drilling & milling spindle
Collet Size: ER11
Output: 1:4
High Speed
Holds 1 tools
Polygon Milling
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Polygon Milling | BSP-510 | (1) Ø13 | 1:1 | A32, L32 | Max tool Ø 60mm |
Gang Slide | Polygon Milling | BSP-511 | (1) Ø10 | 1:1 | A32, L32 | Max tool Ø 55mm |

CIT-BSP-510 -Polygon attachment

CIT-BSP-511 - Polygon attachment
Saw
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Slotting Saw | BSS-1530 | (1) ER16 | 5:3 | A32, L32 | Max tool Ø 80mm, Width 3mm |
Gang Slide | Slotting Saw | GSC-1307-DEC | (1) Ø16 | 1:1 | A32, L32 | Max tool Ø 63mm, Width 6mm |
Gang Slide | Slotting Saw | GSS1035-DEC | (1) Ø10 | 1:1 | A32, L32 | |
Sub Spindle | Slotting Saw | BSS-1530 | (1) ER16 | 5:3 | A32, L32 | Max tool Ø 80mm, Width 3mm |

CIT-BSS-1530 - Slitting saw attachment with ER16 arbor size, 5:3 Output, Max Tool Ø: 80mm, Max Tool Thickness: 3mm

CIT-GSC-1307-DEC - Slitting saw attachment with Ø16mm arbor, 1:1 Output, Max Tool Ø: 63mm, Max Tool Thickness: 6mm

CIT-GSS-1035-DEC - Slitting saw attachment with Ø10mm Arbor Size, 1:1 Output
Whirling
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Whirling | BSW-315 | (1) Utilis | 1:1 | A32 | 9 or 12 Insert Cutter, Adjustable ±15º, Flight Ø12, Requires removal of the 4-position ID Tool Block , Utilis ring #137578 |
Gang Slide | Whirling | BSW-315-II | (1) Utilis | 1:1 | A32 | 9 or 12 Insert Cutter, Adjustable ±15º, Flight Ø12, T07 Blocked, Postiton T08 can only be used with Ø25x52mm in position , Utilis ring #137578 |
Gang Slide | Whirling | BTW2000-A32 | (1) Utilis | 1:1 | 9 or 12 Insert Cutter, Adjustable ±15º |

CIT-BSW-315 - Thread Whirling Attachment, Ring: Utilis, Output 1:1, 9 or 12 Insert Cutter, Flight Circle Ø 12mm, Requires removal of the 4-position ID tool block,

CIT-BSW-315-II - Thread Whirling Attachment, Ring: Utilis, Output: 1:1, 9 or 12 Insert Cutter, Flight Circle Ø: 12mm, T07 position blocked, position T08 can only be used with Ø25 x 52mm in position,

CIT-BTW2000-A32 - Thread Whirling Attachment, Ring: Utilis, Output: 1:1, 9 or 12 Insert Cutter, Adjustable ±15°
Tool Holder
Position | Operation | Product No. | (#Tools) Size | Output | Machine | Other |
---|---|---|---|---|---|---|
Gang Slide | Tool Holder | GDF-1207-L | (4) Ø19.05 | A32 | 4 Position 3/4” Ø Sleeves | |
Gang Slide | Tool Holder | GDF-1501-II | (3) Ø25.4 | A32 | Holds 3 Ø1inch sleeves, Position T06-T09 |

CIT-GDF-1207-L - Static tool post replaces standard milling spindle and adds up to 4 collet sleeve positions for extra ID tool capacity. Can be paired with double ended holders for simultaneous sub-spindle drilling and boring operations. Features 4, 3/4" diameter tool positions.

GDF-1501-II
Tool Holder
Tool Ø Size: 1inch
Holds 3 1inch sleeves
Positions T06-T09