Dog Leg Tool Holders for CNC Swiss Machines
Dog Leg boring bar holders convert an unused O.D. turning position on the gang slide of your Swiss Style Lathe into an added ID position. The holder bore is made to the desired shank size of the intended boring bar, spot drill or ID grooving tool. Dog leg holders hold tooling squarely & accurately.
- Custom made to your specs
- Use for holding spot, drill & boring tools
- Converts a turning station to a ID working station
- Interference free in most Swiss Machines


Part No. | S | B | O |
---|---|---|---|
TBH-375-125-500 | .375" | .125" | .500" |
TBH-375-125-625 | .375" | .125" | .625" |
TBH-375-187-500 | .375" | .187" | .500" |
TBH-375-250-500 | .375" | .250" | .500" |
TBH-375-250-625 | .375" | .250" | .625" |
TBH-375-250-750 | .375" | .250" | .750" |
TBH-500-125-500 | .500" | .125" | .500" |
TBH-500-156-1000 | .500" | .156" | 1.00" |
TBH-500-187-500 | .500" | .187" | .500" |
TBH-500-187-750 | .500" | .187" | .750" |
TBH-500-250-500 | .500" | .250" | .500" |
TBH-500-250-625 | .500" | .250" | .625" |
TBH-500-250-750 | .500" | .250" | .750" |
TBH-500-250-1000 | .500" | .250" | 1.00" |
TBH-500-250-1250 | .500" | .250" | 1.25" |
TBH-500-312-1000 | .500" | .312" | 1.00" |
TBH-500-375-500 | .500" | .375" | .500" |
TBH-500-375-750 | .500" | .375" | .750" |
TBH-500-375-1000 | .500" | .375" | 1.00" |
Part No. (Metric) | S | B | O |
---|---|---|---|
TBH-10M-125-500 | 10mm | .125" | .500" |
TBH-10M-125-750 | 10mm | .125" | .750" |
TBH-10M-187-750 | 10mm | .187" | .750" |
TBH-10M-250-500 | 10mm | .250" | .500" |
TBH-10M-250-750 | 10mm | .250" | .750" |
TBH-12M-187-500 | 12mm | .187" | .500" |
TBH-12M-250-500 | 12mm | .250" | .500" |
TBH-16M-125-500 | 16mm | .125" | .500" |
TBH-16M-250-1000 | 16mm | .250" | 1.00" |
TBH-16M-312-750 | 16mm | .312" | .750" |
TBH-16M-375-1000 | 16mm | .375" | 1.00" |