Multidec-ISO Swiss-Turning tools by UTILIS
The Multidec-ISO series of Swiss-turning tools is a robust solution for small parts turning. A wide variety of carbide grades, coatings, as well as chip breaker styles and holder designs are available creating a broad selection of solutions for precision turning. Inserts are available with 35°, 55° & 80° angles.
Multidec-ISO tool holder shanks are specifically designed for Swiss-Type machines, retaining positioning close to the guidebushing, ensuring rigidity and accuracy.
Shown below are some of the most popular geometries in our line of ISO style turning tools for Swiss machines. For additional offerings, additional information on these listings as well as usage recommendations for each geometry, please refer to our general catalog which can be downloaded from here: GenSwiss General Catalog
For even more insert and holder choices, please refer to the UTILIS Multidec Catalog
| Designation - 55 |
Nose Radius |
| DCGT 0702006 FN -A3 |
0.06mm / .0023" |
| DCGT 0702015 FN -A3 |
0.15mm / .0059" |
| DCGT 0702035 FN -A3 |
0.35mm / .0137" |
| DCGT 11T3008 FN -A3 |
0.08mm / .0031" |
| DCGT 11T3015 FN -A3 |
0.15mm / .0059" |
| DCGT 11T3035 FN -A3 |
0.35mm / .0137" |
| Designation - 35 |
Nose Radius |
| VCGT 1103008 FN -A3 |
0.08mm / .0031" |
| VCGT 1103015 FN -A3 |
0.15mm / .0059" |
| VCGT 1103035 FN -A3 |
0.35mm / .0137" |
| VCGT 1303015 FN -A3 |
0.15mm / .0059" |
| VCGT 1303035 FN -A3 |
0.35mm / .0137" |
| VCGT 1303075 FN -A3 |
0.75mm / .0295" |
| Designation - 55 |
Nose Radius |
| DCGT 070202 FN -PA5 |
0.2mm / .0078" |
| DCGT 070204 FN -PA5 |
0.4mm / .0157" |
| DCGT 11T302 FN -PA5 |
0.2mm / .0078" |
| DCGT 11T304 FN -PA5 |
0.4mm / .0157" |
| DCGT 11T308 FN -PA5 |
0.8mm / .0314" |
| Designation - 35 |
Nose Radius |
| VCGT 110302 FN -PA5 |
0.2mm / .0078" |
| VCGT 110304 FN -PA5 |
0.4mm / .0157" |
| VCGT 160404 FN -PA5 |
0.4mm / .0157" |
| VCGT 160408 FN -PA5 |
0.8mm / .0314" |
| |
|
| Designation - 55 |
Nose Radius |
| DCGT 070202 FN -PA7 |
0.2mm / .0078" |
| DCGT 070204 FN -PA7 |
0.4mm / .0157" |
| DCGT 11T302 FN -PA7 |
0.2mm / .0078" |
| DCGT 11T304 FN -PA7 |
0.4mm / .0157" |
| DCGT 11T308 FN -PA7 |
0.8mm / .0314" |
| Designation - 35 |
Nose Radius |
| VCGT 110302 FN -PA7 |
0.2mm / .0078" |
| VCGT 110304 FN -PA7 |
0.4mm / .0157" |
| VCGT 110308 FN -PA7 |
0.8mm / .0314" |
| VCGT 160404 FN -PA7 |
0.4mm / .0157" |
| VCGT 160408 FN -PA7 |
0.8mm / .0314" |
| Designation - 55 |
Nose Radius |
| DCGT 0702005 FN PF23 |
0.05mm / .0019" |
| DCGT 070201 FN PF23 |
0.1mm / .0039" |
| DCGT 070202 FN PF23 |
0.2mm / .0078" |
| DCGT 11T3005 FN PF23 |
0.05mm / .0019" |
| DCGT 11T301 FN PF23 |
0.1mm / .0039" |
| DCGT 11T302 FN PF23 |
0.2mm / .0078" |
| Designation - 35 |
Nose Radius |
| VCGT 1103005 FN -PF23 |
0.05mm / .0019" |
| VCGT 110301 FN -PF23 |
0.1mm / .0039" |
| VCGT 110302 FN -PF23 |
0.2mm / .0078" |
| VCGT 1604005 FN -PF23 |
0.05mm / .0019" |
| VCGT 160401 FN -PF23 |
0.1mm / .0039" |
| VCGT 160402 FN -PF23 |
0.2mm / .0078" |
| Designation - 55 |
Nose Radius |
| DCMT 070202 EN -PF43 |
0.2mm / .0078" |
| DCMT 070204 EN -PF43 |
0.4mm / .0157" |
| DCMT 11T302 EN -PF43 |
0.2mm / .0078" |
| DCMT 11T304 EN -PF43 |
0.4mm / .0157" |
| DCMT 11T308 EN -PF43 |
0.8mm / .0314" |
| Designation - 35 |
Nose Radius |
| VCMT 110302 EN -PF43 |
0.2mm / .0078" |
| VCMT 110304 EN -PF43 |
0.4mm / .0157" |
| VCMT 160404 EN -PF43 |
0.4mm / .0157" |
| VCMT 160408 EN -PF43 |
0.8mm / .0314" |
| Designation - 55 |
Nose Radius |
| DCMT 070204 EN -PM |
0.4mm / .0157" |
| DCMT 070208 EN -PM |
0.8mm / .0314" |
| DCMT 11T304 EN -PM |
0.4mm / .0157" |
| DCMT 11T308 EN -PM |
0.8mm / .0314" |
| Designation - 35 |
Nose Radius |
| VCMT 160404 EN -PM |
0.4mm / .0157" |
| VCMT 160408 EN -PM |
0.8mm / .0314" |
| |
|
| |
|
| Designation - 55 |
Nose Radius |
| DCGT 11T304 FR -TOP5 |
0.4mm / .0157" |
| DCGT 11T308 FR -TOP5 |
0.8mm / .0314" |
| Designation - 35 |
Nose Radius |
| VCGT 110304 FR TOP5 |
0.4mm / .0157" |
