Multidec-TOP & Multidec-ISO Swiss-Turning tools by UTILIS

 
 
Multidec-TOP inserts feature a trailing wiper geometry which produces a stronger cutting edge. This allows for faster feeds while simultaneously increasing surface finish by burnishing the high-points of the turn pattern. The Multidec-TOP line features a sharp tool nose radius of 0mm .08mm and .2mm with chip control geometry and is ideal for precision small parts turning in tough materials.

Versatile Cutting Geometry

  • Cutting geometry and chipbreaker enables turning in three directions

Wiper Geometry

  • Wiper geometry enables faster feeds while maintaining good surface finish

Versatile Holders

  • Holders especially designed for front turning and back turning
  • Coolant-Thru holders also available

 

 


Left Hand Right Hand Edge Nose Radius
*Polished Rake
*Sharp Cutting Edge
     
VPGT 1003008 EL TOP --- Honed 0.08mm / .0031"
VPGT 1003ZZ FL TOP VPGT 1003ZZ FR TOP Sharp Zero Radius - Sharp
--- VPGT 1003005 FR TOP Sharp 0.05mm / .0019"
VPGT 1003008 FL TOP VPGT 1003008 FR TOP Sharp 0.08mm / .0031"
VPGT 1003015 FL TOP VPGT 1003015 FR TOP Sharp 0.15mm / .0059"

Left Hand Right Hand Edge Nose Radius
*Polished Rake
*Sharp Cutting Edge
     
VPXT 1003015 EL TOP VPXT 1003015 ER TOP Honed 0.15mm / .0059"
VPXT 1003035 EL TOP VPXT 1003035 ER TOP Honed 0.35mm / .0137"

Left Hand Right Hand Edge Nose Radius
*Round Cutting Edge      
VPET 1003ZZ FL TOP VPET 1003ZZ FR TOP Sharp Zero Radius - Sharp
--- VPET 1003003 FR TOP Sharp 0.03mm / .0011"
VPET 1003008 FL TOP VPET 1003008 FR TOP Sharp 0.08mm / .0031"
VPET 1003015 FL TOP VPET 1003015 FR TOP Sharp 0.15mm / .0059"

SVJP TOP Holders - 93 degree angle

Left Hand Right Hand h b L f
SVJPL 0807 H10 SVJPR 0807 H10 7 8 100 8
SVJPL 0808 F10 SVJPR 0808 F10 8 8 80 8
SVJPL 0808 H10 SVJPR 0808 H10 8 8 100 8
SVJPL 1010 F10 SVJPR 1010 F10 10 10 80 10
SVJPL 1010 H10 SVJPR 1010 H10 10 10 100 10
SVJPL 1212 H10 SVJPR 1212 H10 12 12 100 12
SVJPL 1616 K10 SVJPR 1616 K10 16 16 125 16
SVJPL 2020 K10 SVJPR 2020 K10 20 20 125 20
SVJPL 3/8” F10 SVJPR 3/8” F10 9.525 9.525 80 9.525
SVJPL 3/8” H10 SVJPR 3/8” H10 9.525 9.525 100 9.525
SVJPL 1/2” H10 SVJPR 1/2” H10 12.7 12.7 100 12.7
SVJPL 5/8” K10 SVJPL 5/8” K10 15.875 15.875 125 15.875
SVJPL 3/4” K10 SVJPL 3/4” K10 19.05 19.05 125 19.05

Coolant Thru SVJP TOP Holders - 93 degree angle

Left Hand Right Hand h b L x1 End Port (d)
SVJPL 0810 H10 V IC SVJPR 0810 H10 V IC 8 10 100 11.5 4005-000111
SVJPL 1010 H10 V IC SVJPR 1010 H10 V IC 10 10 100 13.5 4005-000111
SVJPL 1212 H10 V IC SVJPR 1212 H10 V IC 12 12 100 15.5 4005-000111
SVJPL 1616 K10 V IC SVJPR 1616 K10 V IC 16 16 125 19.5 4005-000104
SVJPL 2020 K10 V IC SVJPR 2020 K10 V IC 20 20 125 23.5 4005-000104
SVJPL 2025 K10 V IC SVJPR 2025 K10 V IC 25 25 125 28.5 4005-000104
SVJPL 3/8” H10 V IC SVJPR 3/8” H10 V IC 9.525 9.525 100 13 4005-000111
SVJPL 1/2” H10 V IC SVJPR 1/2” H10 V IC 12.7 12.7 100 16.2 4005-000111
SVJPL 5/8” K10 V IC SVJPR 5/8” K10 V IC 15.875 15.875 125 19.4 4005-000104
SVJPL 3/4” K10 V IC SVJPR 3/4” K10 V IC 19.05 19.05 125 22.6 4005-000104

Reinforced SVJP TOP Holders - 93 degree angle

Left Hand Right Hand h b L f
SVJPL 0810 F10 V SVJPR 0810 F10 V 8 10 80 10
SVJPL 0810 H10 V SVJPR 0810 H10 V 8 10 100 10
SVJPL 1010 F10 V SVJPR 1010 F10 V 10 10 80 10
SVJPL 1010 H10 V SVJPR 1010 H10 V 10 10 100 10
SVJPL 1212 H10 V SVJPR 1212 H10 V 12 12 100 12
SVJPL 1616 K10 V SVJPR 1616 K10 V 16 16 125 16
SVJPL 2020 K10 V SVJPR 2020 K10 V 20 20 125 20
SVJPL 3/8” F10 V SVJPR 3/8” F10 V 9.525 9.525 80 9.525
SVJPL 3/8” H10 V SVJPR 3/8” H10 V 9.525 9.525 100 9.525
SVJPL 1/2” H10 V SVJPR 1/2” H10 V 12.7 12.7 100 12.7
SVJPL 5/8” K10 V SVJPR 5/8” K10 V 15.875 15.875 125 15.875
SVJPL 3/4” K10 V SVJPR 3/4” K10 V 19.05 19.05 125 19.05

GenSwiss Catalog

Utilis 2016 Catalog