SLITTING SAW SPEEDS & FEEDS

 

MATERIAL GROUPS

Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9
Steels up to 50 daN/mm² Steels 50-80 daN/mm² Steels 80-100 daN/mm² Steels 100-130 daN/mm² Alloyed Steels CR, Ni Tough Materials Copper Aluminium Plastic
Construction steels Construction steels Construction steels Stainless steels Stainless steels High alloyed steels Brass   Thermoplast
Tempering steels Tempering steels Tempering steels Alloyed tool steels Heat resisting steels Nickel Alloys Bronze   Duroplast
Case hardening steels Spring steels Nitrid steels High speed steels Titanium alloys Inconel      
Steels for automatic lathes Case hardening steels Cast iron >180 HB Heat resisting steels   Waspalloy      
  Non-alloyed tool steels Spring steels Cast iron >180 HB   Nimonic      
    Tool steels            


SURFACE FEET PER MINUTE

  Material Group 1 Material Group 2 Material Group 3 Material Group 4 Material Group 5 Material Group 6 Material Group 7 Material Group 8 Material Group 9
  525 460 330 280 230 130 625 820 1640


RPM PER DIAMETER

  Material Group 1 Material Group 2 Material Group 3 Material Group 4 Material Group 5 Material Group 6 Material Group 7 Material Group 8 Material Group 9
15 mm 3400 3000 2125 1800 1500 840 4000 5300 10600
20 mm 2550 2200 1600 1360 1120 630 3000 4000 7950
25 mm 2038 1800 1280 1100 900 500 2425 3200 6365
30 mm 1700 1500 1065 900 750 420 2000 2650 5300
40 mm 1275 1100 800 680 560 315 1500 2000 3975


FEED PER TOOTH

  Material Group 1 Material Group 2 Material Group 3 Material Group 4 Material Group 5 Material Group 6 Material Group 7 Material Group 8 Material Group 9
  .0005”-.001” .0005”-.001” .0004”-.0008” .0004”-.0008” .0003”-.0006” .0003”-.0006” .0006”-.0012" .0006”-.0012" .0005”-.001”





BACK TO SUPPORT PAGE     BACK TO SLITTING SAW PAGE




 

 

GENSWISS 2024 CATALOG

 

UTILIS 2022-2023 CATALOG

 

GENSWISS REACH COMPLIANCE DECLARATION