Tooling & Attachments for STAR SR20/32 & ECAS20 CNC Swiss Machines

STA-E20-GSC-3X -This High Speed Cross Drill/Mill Spindle is a direct replacement of the OEM spindles and provides a 3x speed output up to 15,000 Max RPMs. Uses a standard ER 11 Collet.
- Simple to install, requires no retrofitting or modifications to the live tool station
- Minimizes Burrs and Improves surface finishes by machining at high speeds
- Direct gear driven from the live tooling motor provides maximum torque & speed.

FITS: SR Series, SV Series & ECAS20 cross slide positions.

STA-E20-GSC-3X

STA-E20-GSC-110 -Standard Cross Drill/Mill Spindle is a direct replacement of the OEM spindles. Uses a standard ER 16 Collet.

- Simple to install, requires no retrofitting or modifications to the live tool station
- Cost effective replacement of worn tool spindles
- Direct gear driven from the live tooling motor provides maximum torque

FITS: SR Series, SV Series & ECAS20 cross slide positions.

STA-E20-GSC-110

STA-E20-GSE-110 -Standard End working Drill/Mill Spindle is a direct replacement of the OEM spindles. Uses a standard ER 16 Collet.

- Simple to install, requires no retrofitting or modifications to the live tool station
- Cost effective replacement of worn tool spindles
- Direct gear driven from the live tooling motor provides maximum torque
- Replaces backworking postions on SR machines or ECAS20 non-turret models

FITS: SR Series & ECAS20 subspindle live working positions.


STA-E20-GSE-1111 -Double face Drill/Mill Spindle is a direct replacement of the OEM spindles. Uses standard ER 11 Collets.

- Simple to install, requires no retrofitting or modifications to the live tool station
- Adds (1) guidebushing facing live tool and (1) sub facing position
- Direct gear driven from the live tooling motor provides maximum torque

FITS: SR Series & ECAS20 cross slide positions.

STA-E20-GSE-1111

STA-E20-GSE-210 -Double face Drill/Mill Spindle is a direct replacement of the OEM spindles. Uses standard ER 16 Collets.

- Simple to install, requires no retrofitting or modifications to the live tool station
- Adds (2) guidebushing facing live tool positions
- Direct gear driven from the live tooling motor provides maximum torque

FITS: SR Series & ECAS20 cross slide positions.

STA-E20-GSE-210

STA-SR20J-GSE-3710
STA-SR32J-GSE-3710

Triple face Drill/Mill Spindle adds six (6). Uses standard ER 16 Collets.

- Simple to install, requires no retrofitting or modifications to the live tool station
- Adds (2) guidebushing facing live tool positions
- Direct gear driven from the live tooling motor provides maximum torque

FITS: SR Series cross slide stations - Specify machine model.

STA-SR32J-GSE-3710

WHIRLING ATTACHMENT FOR STAR SR20J CNC Swiss Machines

STA-SR20J-W20 - Thread Whirling attachment for STAR SR Series machines.
- 1:1 gear ratio
- Easy to install with no retrofitting
- +/- 20 degree helix adjustment

Available with UTILIS 9 or 12 Insert Cutter Ring

FITS: SR Series, ECAS20 cross slide positions.

STA-SR20J-W20

ROTARY BROACHING ATTACHMENT FOR STAR SR-SERIES

RBH-2160-160-038-MBG-T16 - Rotary Broaching attachment for STAR SR Series machines. Features face mounting plate with STAR tool holder bolt pattern.

- Same great adjustment free design as our standard 2160 Series Holder
- Easy to install in your STAR CNC Swiss Machine
- Intereference free in most situations.
- 77mm hangout from flange to tip of broach tool

FITS: SR10, SR20 SR32, SB16, ECAS20 and ANY OTHER face mounted tool station

RBH-2160-160-038-MBG-T16

Suggested Problem Solving Small Tooling

RBH-2160-220-100: Swiss Type Rotary Broach Holder - 22mm Shank: A low profile Rotary Broach Holder specifically designed for CNC Swiss Type Machines. Reduces setup time by eliminating the need indicate the broach to center and is small enough to fit into the tightest tooling setups. Capable of withstanding up to 2250lbs of thrust force, this rotary broach holder is ideal for swiss-type medical applications and works well for broaching tough materials such as Titanium, 300 Series Stainless and other medical grade alloys. Click here for more info


Precision ER Collet holders and tool holding products for STAR Swiss Machines: GenSwiss is proud to offer a complete line of ER Straight shank collet holders for STAR CNC Swiss machines. Quick change type, coolant thru and Super Precision for micro tool holding are also available Click here for more info


Straddle Knurling Holders: Conventional 'bump' knurling methods are undesirable for smaller diameter parts as the forces will deflect the workpiece. To control this problem, a straddle knurl holder should be used to provide support to the workpiece while the knurling operation is performed. Low profile straddle knurling holders are adjustable to accomodate a range of part diameters. Click here for more info


Ti-Loc Saw Arbors and Endmill Extensions:Introducing an exciting product in the GenSwiss Signature tooling line,The Ti-Loc SwissClamp System. This Taper-integrated small tooling system is designed to work with virtually any collet or tool holder that employs the dual angle ER collet system (DIN6499)
Click here for more info